|
1 Front Hood (including
Metal Inserts)
1 Front Nose
1 Headlight Cover (left)
1 Headlight Cover (right)
1 Front Inside Panel
1 Under nose Panel
1 Passenger Door
1 Driver Door
1 Passenger Rocker Panel
1 Driver Rocker Panel
1 Mid-Roof Section
1 Rear Deck (including Metal Inserts)
2 Carburetor Covers
1 Rear Bumper Section
1 Rear Shoulder Spoiler
1 Rear Inside Panel
1 Dash Instrument Pod
1 Center Console
1 Dash Knee Pod
1 Console Top Insert
1 Nose Bar
1 Left Shoulder Scoop
1 Right Shoulder Scoop
Wing & Pedestal Assembly
Fasteners
50 TEK #8-18x3/4 Hex Head Screw
20 Extruded Cage Nuts
50 Hex Screw Nuts (expanded metal)
50 Hex Screws (expanded metal)
20 Hex Head Cap Screw (61x30mm)
50 Aluminum Pop Rivets
2 Door Rod Clips
1 Remote Control Rod End Clip (Pass.)
1 Remote Control Rod End Clip (Driver)
8 Phillip Head Machine Screws (6x1x20)
20 1/4x20x1" Bolts
20 1/4" Nylon Lock Nuts
20 1/4" Flat Washers
4 1/4" Self Thread Nuts
2 5/16"x1 1/2 Bolts
2 5/16"x1 3/4" Bolts
2 5/16"x2 3.4" Bolts
2 5/16"x1 1/4" Bolts
8 5/16"xNylon Lock Nuts
32 5/16" Flat Washers
8 3/8"x1" Bolts
4 3/8"x2 3/4 Bolts
12 3/8" Nylon Lock Nuts
24 3/8" Flat Washers
24 Butt Connectors
|
Front
End Support Sub frame
1 Rear End Support Sub frame
1 Rear Support Bracket (Mid Sect)
2 Rear Deck Hinges
2 Rear Deck Locate Pins
4 Front Headlight Adjusters
2 Front Hood Hinges
2 Front Hood Locate Pins
4 Door Linkage Rods (set)
4 Corvette Receptacles
1 Sheet of Expanded Metal
4 Hood Locate Pin Bushing
2 Rear Deck Hood Pins
2 Rear Deck Hood Pin Springs
2 Rear Deck Locate Pins
1 Rear Deck Prop-Up Rod
1 Rear Deck Prop-Up Plate |
